Skip to main content
All posts

Auto repair invoice software: 4 shop systems priced

Nnabuike Okoroafor

Nnabuike Okoroafor ·

We make Charming Invoices, an invoicing app that competes with some of the tools below for the smallest shops. We have tried to be fair: this post says where each tool is the better fit, and every vendor fact comes from that vendor's own page, read on 28 October 2026. Prices change, so check each pricing page before you buy.

You fix cars, not spreadsheets. But every job ends in an invoice, and the question is what should produce it: a full shop-management system with repair orders, inspections and parts, or something lighter. Search for automotive repair shop invoice software and most results are vendors' own pages, one product at a time.

This guide puts four shop systems side by side at the prices on their own pages on 28 October 2026, shows what the cheapest plan actually includes, works out two years of cost, and gives an honest answer to whether a one-bay shop or a mobile mechanic needs shop software at all.

Auto repair invoice software in short#

  • Shop-management systems (Tekmetric, Shopmonkey, AutoLeap) start at $179 to $215 a month billed yearly, or $199 to $239 billed monthly. They run the whole shop: repair orders, inspections, parts and technicians, with the invoice at the end.
  • ARI lists a lower price: $39.99 a month or $399.99 a year for its Pro plan, with invoicing, inspections, inventory and payments.
  • Invoice2go is an estimate-and-invoice app with an auto repair page, not a shop system. Its plans set a yearly invoice limit.
  • The labour guide is on second-tier plans. Tekmetric, Shopmonkey and AutoLeap all put labour guides or MOTOR and ALLDATA data on their second tier.
  • You may not need any of them if you quote by phone, buy parts per job and work alone. A clear invoice from a template or an invoicing app does that part.

Shop-management software vs invoicing software#

The two kinds of tool solve different problems, and the price gap reflects it.

Shop-management systemInvoicing app or template
Starts fromA repair order, opened when the car arrivesThe invoice, written when the job is done
Estimates and authorisationBuilt in, often with digital signaturesSeparate tool, or none
PartsLookup, ordering, often inventoryTyped in as line items
Labour pricingLabour guides on most mid-tier plansYour own rates
Vehicle historyStored per vehicle, often with VIN decodeWhatever you write on the invoice
Card paymentsUsually offered, with processing fees (on some plans)Depends on the tool
Listed price, October 2026$179 to $499 a month per shop, depending on plan and billing (ARI from $33.33)Free plans exist; paid plans vary

Field-service tools sit between the two. If you run a trade business with crews and scheduling rather than bays, our guide to invoicing software for contractors covers that group.

The comparison table, October 2026#

Here is the entry plan of each shop system, as listed on its own pricing page on 28 October 2026. Prices are per location.

Tool, entry planMonthlyBilled yearly (per month)UsersLabour guide
Tekmetric Start$199$179UnlimitedFrom Grow ($349 / $309)
Shopmonkey Basic$239$2153 included, +$20 a month eachMOTOR and ALLDATA from Clever ($399 / $359)
AutoLeap Essentials$199$179No limit statedFrom Pro ($349 / $309)
ARI Pro$39.99$33.33 ($399.99 a year)No limit on paid plansListed as an integration, not a plan feature

And what each says about trials, contracts and set-up on the same pages:

ToolFree trialContractSet-up fee
Tekmetric“Tekmetric offers free demos but not free trials.”“No long-term contracts required.”Not mentioned
ShopmonkeyNot mentioned on the pricing pageNot statedA footnote mentions “a one-time $500 data migration fee”; ask what it applies to
AutoLeap“AutoLeap doesn’t offer a free trial due to the fact that we custom-build the system with your necessary shop information.”Not statedA one-time set-up fee, which the page says “includes your dedicated implementation plan, full data migration, hands-on team training, and priority support throughout your setup”. Amount not published
ARIUp to 5 invoices, estimates, inspections, clients and vehicles“No contracts and no surprises, that’s our promise to you.”Not mentioned

Where a cell says “not stated”, ask the vendor before you sign. Those details can change the total.

Each auto repair invoicing tool, plan by plan#

Tekmetric#

Tekmetric's pricing page lists four plans, each priced per shop: Start at $199 a month or $179 billed annually, Grow at $349 or $309, Scale at $439 or $409, and Enterprise at custom pricing. Every plan has unlimited users and unlimited repair orders.

Start includes inventory and vendor management, digital vehicle inspections and “Digital Authorizations & Invoicing”. The labour guide, maintenance schedule and time clocks arrive on Grow. Integrated payments are listed on the Enterprise card; for payments on lower plans, the page says “Ask about our special intro offers!” Add-ons include extra shops at $70 a month each and a Tire Suite at $39 a month.

Better fit for: a shop with several technicians that wants unlimited users at a flat price, and is happy to book a demo instead of a trial.

Shopmonkey#

Shopmonkey's pricing page lists Basic at $239 a month or $215 a month on annual pricing, Clever at $399 or $359, Genius at $499 or $449, and Multi-Shop at custom pricing. Basic includes 3 user licences; extra users are $20 a month each.

Basic lists “Unlimited Estimates & Invoices”, and in-person and online payments appear on every plan. MOTOR parts and labour data and the ALLDATA integration start on Clever. Card processing fees say “Call for Pricing”, and the card reader is listed at “$299 + $10/mo/device”.

Better fit for: a shop that wants estimates, invoices and payments in one place and is willing to ask for processing rates before signing.

AutoLeap#

AutoLeap's pricing page lists Essentials at $199 a month or $179 billed annually, Pro at $349 or $309, Elite at $449 or $409, and Enterprise at custom pricing. Every plan lists unlimited repair orders and invoices, VIN and licence-plate decode, CARFAX vehicle history and payments.

Labour guides and QuickBooks Online integration start on Pro. There is no free trial, and a one-time set-up fee covers implementation, data migration and training, with no amount on the page. An AI receptionist add-on is listed at $99 a month.

Better fit for: a shop that wants VIN decode and vehicle history from the first plan and values guided set-up over a self-serve start.

ARI#

ARI's pricing page lists ARI Pro at $39.99 a month or $399.99 a year, and ARI Pro Plus at $59.99 a month or $599.99 a year. Both list invoicing, inspections, inventory, appointments, reminders, time tracking, payments and a client portal. The page says “there is no limit on how many users you can add” and “There is NO limit on how many invoices you can create per month” on paid plans.

VIN decoding and labour guides appear as integrations rather than plan features, without prices. Pro Plus adds 3,000 one-time credits for its AI features.

Better fit for: a one- or two-bay shop or a mobile mechanic who wants shop-style features at ARI's listed price and does not need labour data built into the plan.

Invoice2go#

Invoice2go is a general invoicing app with an auto repair page. It says estimates “can be easily converted to invoices without having to re-enter customer and car details”, that you can “add lines for parts and labor”, and that you can “Accept customer payments directly from your invoice”.

Its pricing page lists invoice limits by plan: Starter 30 a year, Professional 100 a year and Premium unlimited, with card fees of 3.5%, 3% and 2.9%. Every plan has a 30-day free trial, and the FAQ says a credit card is needed to start it. The plan prices did not appear in the page text we could read, so see Invoice2go's plans in our review, and check the page before you buy.

Better fit for: a mobile mechanic who wants estimates and card payments from a phone, and whose invoice count fits the plan's yearly limit.

What each costs over two years#

Here is two years of the cheapest plan for one location, at the regular prices listed on 28 October 2026. Card processing fees, add-ons and set-up fees are extra.

Tool, entry planMonthly × 24Billed yearly, 2 years
Shopmonkey Basic$5,736$5,160
Tekmetric Start$4,776$4,296
AutoLeap Essentials$4,776 + set-up fee$4,296 + set-up fee
ARI Pro Plus$1,439.76$1,199.98
ARI Pro$959.76$799.98
Charming Pro$288$198
Charming Individual (lifetime)$29 once$29 once
Charming Free$0$0
Not like for like: the shop systems include tools Charming does not have. The gap is the price of those tools.

Three details change the total:

  • Extra users on Shopmonkey. Basic includes 3. A fourth user at $20 a month adds $480 over two years.
  • Card readers. Shopmonkey lists its reader at $299 plus $10 a month per device: $539 per device over two years, before processing fees.
  • The labour guide tier. If you quote from book times, compare second-tier prices instead: Tekmetric Grow and AutoLeap Pro are both $309 a month billed yearly, $7,416 over two years.

The comparison is not like for like. The shop systems include estimates, inspections and parts tools that an invoicing app does not have. Whether those are worth several thousand dollars over two years depends on how many cars go through your bays.

What an auto repair invoice must show#

Whatever produces it, a repair invoice needs the vehicle, the VIN and odometer reading, each operation with its labour charge, each part with its part number and whether it is new, used or rebuilt, and any core charge. Our mechanic invoice template with a sample repair invoice walks through every field with a sample brake and alternator job.

Some states write repair invoice and estimate content into law. The template page quotes California's and Florida's rules. Rules vary by state, so check your state's consumer-protection or automotive-repair regulator, or ask a lawyer. This is general information, not legal advice.

If you also tow, the towing invoice template covers hook-up, mileage and storage lines.

Do you need shop software? A checklist for small shops#

Shop-management software earns its price when several people, several bays and a parts shelf all need to agree. Work down this list; the first yes decides.

  1. Do you stock parts, or want parts ordering and inventory in the same system? Yes: a shop-management system.
  2. Do you price jobs from a labour guide rather than your own list of rates? Yes: a shop system's labour-guide tier.
  3. Do several technicians share bays, jobs and inspection photos every day? Yes: a shop system.
  4. Do you need written estimates that turn into invoices in the same app? Yes: ARI, Invoice2go or a shop system's entry plan. Our list of estimate and invoice software has more options, and the difference between an estimate, a quote and an invoice explains what each document commits you to.
  5. None of the above? An invoicing app or a free template is enough.
A mobile mechanic who quotes by phone and buys parts per job usually ends at the bottom box.

For many one-person businesses, the job of software is to get the invoice out, remind the client and show what is owed. Inventory, labour guides and inspections matter once the shop grows.

Taking card payments? Check what card payments on an invoice cost before you pick a tool for its built-in payments; the processing fee often outweighs the subscription.

Where Charming fits, and where it does not#

Charming Invoices is an invoicing app, not shop software. It suits a mobile mechanic or a one-bay shop that writes a handful of invoices a week and quotes by phone. A shop with several bays, technicians and a parts shelf should buy a shop-management system. Here is what Charming does, checked in our code on 28 October 2026.

What it does:

  • An “Auto repair order” starter kit. On a new invoice, choose Start from a kit, then “Auto repair order” under Trades. It adds lines for diagnostics, labour (book time and actual time), new and used or rebuilt parts, a core charge, supplies, a hazardous waste fee and sublet work, all at $0.00 so you enter your own prices.
  • Sections and units. Lines grouped under the same section label print together with their own subtotal on the Contractor template, so labour and parts come out separately. Each line takes a unit such as hrs or ea.
  • Unlimited invoices and clients on the free plan, for 1 business, with your logo, colours and fonts and all 60 templates, including Contractor.
  • Your bank details and a payment link, printed on every invoice once you add them. Issue the invoice, then download the PDF, print it or copy a private link the client opens without an account, and send it however you like. Overdue invoices are flagged so you can see what is still owed.
  • It runs in a browser, including a phone's. See invoicing from a phone for what that is like day to day.

Vehicle details go in the text. Charming invoices have no VIN, odometer or repair-order fields. Put the vehicle, VIN and odometer reading in the first line's description or the invoice notes. There is no VIN decode.

What it does not do, plainly: no estimates or repair orders, no labour guides, no parts lookup, ordering or inventory, no digital inspections, no vehicle history, no scheduling, no invoice emails or payment reminders (it does not send anything to your client; set a calendar reminder or use your own email), no card payments or card reader, no QuickBooks sync or other integrations, and no native mobile app. Payment tracking is manual: you record each payment or mark the invoice paid yourself.

The catches on price: free invoices carry a small “Sent with Charming Invoices” line, which is hidden by default on paid plans. Paid plans are Individual at $29 once (solo), Team at $79 once (up to 5 teammates) and Pro at $12 a month or $99 a year (unlimited teammates). AI drafting is on paid plans only, and the lifetime plans are final sale.

If that is all your shop needs, create a free invoice from the auto repair starter kit, or compare plans on the pricing page. If you are still weighing general invoicing apps, see which invoicing app fits your business.

Questions about auto repair invoice software#

Is there free auto repair invoice software?#

None of the four shop systems has a free plan. ARI's free trial allows up to 5 invoices, estimates, inspections, clients and vehicles; Tekmetric and AutoLeap offer demos instead of trials. Free invoicing apps, such as Charming's free plan, can produce a repair invoice but have no shop features.

What do mobile mechanics use for invoicing?#

It depends on whether they need estimates and card payments on site. Of the tools above, ARI and Invoice2go are priced for small operations; an invoicing app or a mechanic invoice template covers the invoice alone. If you run crews rather than bays, field-service invoicing software is the other route. For collision and detailing work, the body shop invoice guide has two annotated samples.

Can I convert estimates to invoices?#

Several of the tools above handle both. Shopmonkey's Basic plan lists “Unlimited Estimates & Invoices”, ARI's free trial counts estimates alongside invoices, and Invoice2go's auto repair page describes converting estimates to invoices. Tekmetric's Start plan lists “Digital Authorizations & Invoicing” and AutoLeap lists verified eSignatures; ask either how an approved estimate carries over. Charming does not do estimates.

Do shop systems connect to QuickBooks?#

Some do, on some plans. As of 28 October 2026, Shopmonkey's plan comparison lists QuickBooks Online integration from Clever, and QuickBooks Desktop integration from Clever at an additional fee; AutoLeap lists QuickBooks Online integration from Pro. Check the plan you are buying.

The short version#

Automotive repair shop invoice software ranges from $39.99 a month (ARI Pro) to $239 a month (Shopmonkey Basic) for an entry plan, as listed on 28 October 2026, and the labour guide usually costs more. Over two years, that is $799.98 to $5,160 billed yearly. If you run several bays and stock parts, a shop system covers that coordination. If you work alone, quote by phone and buy parts per job, a clear invoice and a calendar reminder for the due date may be all the software you need.

Sources, all read 28 October 2026: Tekmetric pricing; Shopmonkey pricing; AutoLeap pricing; ARI pricing; Invoice2go auto repair; Invoice2go pricing.